Siemens WinCC Unified · TIA Portal
The operating elements WinCC does not ship with.
18 custom web controls that run inside the runtime, bind to your tags and need neither a web server nor a certificate. Every one of them is live on this page.
- 18
- Controls
- 152
- Bindable properties
- 6
- Events
- 0
- External dependencies
Control 01 of 18
Heating
Room thermostat with a semicircular scale for the measured temperature and a drag wheel for the setpoint.
- Measured temperature as a pointer in the gradient, 6 to 32 degrees
- Setpoint 8 to 28 degrees by wheel or buttons
- Detects its own echo by value, not by a timeout
Control 02 of 18
Colour picker KNX
Colour wheel for KNX LED controllers: hue by angle, saturation by radius, brightness on the surrounding ring.
- Values in 0 to 100 percent instead of 0 to 255, ready for KNX
- Setpoint and feedback kept strictly apart
- White channel switchable for RGB-only strips
Control 03 of 18
Energy-flow line
Energy-flow line with eight motion patterns. Smooth, not tag-driven.
- 8 patterns, selected by checkbox
- Time-based, so no stutter under load
- Render loop stops when nothing moves
Control 04 of 18
Timer
Switch-on and switch-off time on a 24-hour rail, snapped to quarter hours.
- 15-minute grid, 96 steps
- Programmes across midnight drawn as two segments
- Recognises both TIME_OF_DAY units by itself
Control 05 of 18
Thumbwheel
A mechanical number wheel. The drum follows your finger, carries on when you let go, and settles into place.
- Wraps endlessly, min and max freely chosen
- Writes only at rest, never while turning
- The number lights up only once the controller acknowledges it
Control 06 of 18
Slider, vertical
Vertical slider for roller shutters. Actual position and setpoint kept apart.
- Actual position and setpoint structurally separated
- Scale labels sit outside the fill and stay readable
- Direction reversible, min and max freely chosen
Control 07 of 18
Step selector
Step selector with an LED bar. Each press advances one step and wraps to zero after the highest.
- 1 to 10 steps
- State survives a screen change
- Cancel by dragging off before release
Control 08 of 18
Battery
State of charge as a battery with a continuous fill, horizontal or upright.
- Warning colours bar, outline and terminal together
- Transparent outside the outline
- Horizontal and upright
Control 09 of 18
Colour gradient
Rectangle with a colour gradient and ten patterns, from triangle mosaic to moiré.
- 10 patterns with a fixed priority order
- Undistorted at any aspect ratio
- Edges always in pure colour
Control 10 of 18
Toggle switch
Toggle switch in the pill design with an LED on the knob.
- Output invertible, appearance unchanged
- LED sits on the knob, not on the rail
- Writes only on an actual tap
Control 12 of 18
Slider, horizontal
Horizontal slider with the actual position and the setpoint kept apart.
- Actual position and setpoint structurally separated
- Labels below the rail, readable at any level
- Direction reversible, min and max freely chosen
Control 13 of 18
Colour picker RGBW
Colour picking with four channels. RGB plus an independent white strip.
- White as its own independent channel
- 0 to 255 and 0 to 100 available in parallel
- Packed RGB value for UDInt tags
Control 14 of 18
Colour picker RGB
Classic colour picking with a saturation field, hue strip and hex readout.
- Separate channels and a packed value at once
- Hex readout font size is bindable
- Name field for presets
Control 15 of 18
Pill button
Capsule-shaped button with an optional status LED. Something WinCC does not offer natively.
- Real CWC events, directly bindable
- Status LED enabled separately
- Second tone derived automatically
Control 16 of 18
Pill indicator
Passive status indicator in the capsule design. Three properties, nothing else.
- Three properties, no outputs
- Capsule shape with a derived gradient
- LED centred rather than below a label
Control 18 of 18
Temperature
Actual/setpoint temperature as a classic thermometer with a fixed cold-warm scale or a static colour.
- Fixed cold-warm scale instead of recolouring
- Setpoint is text only, no effect on the tube
- Static colour as an alternative to the gradient
All 18 controls, one price, one download.
All 18 controls, one bundle
You get all 18 controls as ready-made ZIP packages that drop straight into your TIA project's customControls folder. No per-control licences, no reordering when you need another one.
- 18 custom web controls as ready-to-use ZIP packages
- Every control scales freely — the insert size is only a starting point
- Every property named and documented
- Step-by-step installation guide for TIA Portal
- Runs without a web server, certificate or internet access
System requirements
- SIMATIC WinCC Unified — Runtime Unified (PC) or a Unified Comfort Panel
- Not for WinCC Comfort, Advanced or Professional: custom web controls do not exist there
- Built and verified with TIA Portal V19
- No web server, no certificate, no internet connection — everything runs locally in the runtime